Please follow the instructions below to safely remove your Lolumina soft-release. Do not force the button off, doing so could damage your camera. Download PDF
Step 1.
Get some “Glide” brand or other very thin dental floss. The type of floss is important because you want it to be able to slide between the mount and adhesive disc. If it is too thick then this will be difficult.
Step 2.
Get a roughly 18″ long piece of dental floss and secure ends around index fingers.
Step 3.
Hold camera steady on lap in-between legs.
Step 4.
Slowly and gently floss between the adhesive disc and the bottom of the SS mounting base. Do not use too a lot of force, and double-check that the placement of the floss is the same in the image. If the adhesive is very sticky, apply a light coating of dish soap on the floss thread to ease in separation.
Step 5.
Continue to floss and wiggle the button to see if it is safe to peel and remove the button. There should be no force required to peel the mount when it is safe to remove.
Step 6.
Once the mount is removed, slowly peel the adhesive disc away at an angle of 90º or less while holding the clear part of the shutter release button. The adhesive should not leave any residue.
I really am upset. I bought an x-t1 with your shuttle release and the first time I used it the button fell off and was lost. I think you should replace it at no charge.
Sorry to hear that.
you want lolumina to replace the button you lost? do you expect a new house, apartment, or car when you misplace your keys?
Is it possible to order the adhesive only, have had to send camera back to factory twice and have no adhesive to reattach your release button ?
Hello,
Would you be so kind and let me know whey you will have the Lolumina Mini for the Fujifilm X-T1 in (Red) available.
Thank you for your time,
Charles Ellenberger
Hey Charles, we just released the Mini Mk.II in button-only models, with the complete-kit being available March 20.
Hello he asked when will you have it instock not that will let him know.
HI CAN YOU CONFIRM WHEN YOU HAVE STOCK OF YOUR RED SOFT RELEASE BUTTON COMPLETE
TO FIT NEW LEICA T CAMERA LOOKING FORWARD TO HEARING FROM YOU.
MANY THANKS
CLIVE SAUNDERS
Hi Clive, We will definitely let you know when the red soft release kit is back in stock. Thanks for reaching out to us.